Technical Support Documents
This page contains a series of links to technical documents related to specific instruments. These documents will offer basic setup information as well as more detailed service and setup procedures. In addition there are links to photographs of several instruments. These photographs show the internal components with identification labels.
Click on the instrument listed to review the available technical support documents.
| PROFILE/Plus | Other |
| PPS | Color Touch |
| Roughness-Porosity | Color Touch PC |
| Caliper | Micro TB-1C |
| Gloss | TB-1 |
| Color-Brightness | Micro S-5 |
| Grammage | S4-M |
| TSA | T480 Gloss |
| TAPPI Brightness | |
| Burst | |
| 538 |
It is Highly Recommended that you right click the file you want and choose "Save Target As" to save the file to your PC. If you simply click the link, the file will try to open in your browser which can take excessive time depending on your internet connection.
- INSTRUMENT SUMMARY - PPS
- Arcom BIOS Settings
- Load Cell Test for PPS
- Paper Detection Setup for Profile-Plus Modules
- PPS Measuring Air Regulation EEPROM Setup
- PPS Component test
- PPS Edit Configuration Screen
- PPS Measuring Air Input Setup
- PPS Measuring Air Regulation EEPROM Setup
- PPS Measuring Module Memory Clear
- PPS Modules Dip Switch Settings
- PPS Setup Bottom Flow Screen
- PPS Setup Clamping Reg
- PPS Setup Instructions
- PPS Setup Measuring Reg
- PPS Setup Top Flow Screen
- Arcom Flash Memory Recovery
- PPS Software Installation On a New ARCOM Board
- PPS Software Update
- PPS Startup Error Codes
- PHOTO - PPS Lower Tray
- PHOTO - PPS Upper Tray
- ACL Cam Alignment
- CALIPER MEASURING HEAD SETUP PROCEDURE
- In-Field Adjustment for the LVDT Bd
- ACL Software Update
- ACL Software Update (For Customer)
- Caliper Error Log
- PHOTO - Caliper Lower Tray
- PHOTO - Caliper Upper Tray
- ARP Connections.doc
- ARP Quick Guide
- ARP head installation.doc
- ARP Porosity Measuring Air Regulation EEPROM Setup
- ARP Roughness Measuring Air Regulation EEPROM Setup
- Profile-Plus Automated Roughness Porosity Tester Manometer Connections and Setup
- PHOTOS - ARP (Power Point)
- System Control Station Installation Procedures
- System Install Guide (Power Point Presentation)
- Profiles and Zones
- Profile and Zones (Power Point Presentation)
- CRYPTO Box Shell File Information
- Profile/Plus Software Error Code Listing
- Auxiliary UV Upgrade
- Micro TB-1C Zero and Gain Setup
- Directional Brightness Lamp and Photocell Alignment
- S4-M Single Beam Zero and Gain Setup
- S4-M Single Beam Zero and Gain Setup
- Head to Glass Check on the Classic Roughness Tester
- Flowmeter Zero Check on the Classic Roughness
- Calibration of the Span Adjustment on a Classic Roughness Tester
